Prepared materials:
Tooth cleaning machine, key, Tooth Cleaning Machine Tool, curved machine, brush/polishing cup, polishing blue three guns
Operation process:
Put on goggles and front towel for the patient, place the mouth cup and saliva suction tube, and hand the doctor the examination gloves. When the nurse opens the instrument tray without wearing gloves, be careful not to touch the edge of the instrument tray with her hands. She should pinch the outer packaging bag with her hands and open it and put it on the operating table.
During the examination, the nurse wipes the instrument for the doctor with cotton balls. The cotton balls need to be clamped out of the cotton ball cylinder with tweezers. Do not directly enter the cotton ball cylinder to take them out with your hands.
To install the Tooth Cleaning Machine Head, you need to lock it with the key, pull it out directly, put on a disposable finger sleeve, and install it on the dental chair. Do not touch the working tip with your hands.
If the saliva suction tube head is accidentally sucked on the patient's face or falls off during the saliva suction process, replace it with a new saliva suction tube directly. The saliva suction tube that falls on the ground does not need to be picked up.
If the negative pressure pipe accidentally falls to the ground during the operation, you need to remove the gloves to pick up the negative pressure pipe.
When installing the sandblasting machine, use an appropriate amount of sand powder, and do not pour the excess sand powder back into the sand powder bottle. Connect the sandblasting handle for operation.
The polishing liquid should be squeezed on the sterile glass plate or the inside of the sterile packaging bag in an appropriate amount. Do not squeeze it on your hands.
After the treatment, take off the gloves, remove the patient's front towel and goggles.
Wipe the dental chair with an alcohol spray bottle, replace the blue film, and use it once per person, rinse it clean, and replace disposable items, including saliva suction tube, mouthwash cup, front towel, gloves, and wipe goggles. Finally, clean the dirt on the ground and prepare to receive the next patient.
High-frequency sound wave vibration and weak current stimulation: The tooth cleaner uses high-frequency sound wave vibration and weak current stimulation to remove dirt and plaque in the mouth. This technology can mix water flow and air flow together and spray it into the mouth through the spray head, while emitting high-frequency sound wave vibration, vibrating water molecules to produce tiny bubbles, forming tiny vortices, and washing away tartar, dirt and plaque.